Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UCCE Lab Call Flow not working CUCM->CVP->NAM-CICM

Call is coming up to NAM and from NAM call is not hitting on CICM.  It is failling at ICM Gateway node in the Script.  What could be the possible reason for this failure?

Please support.

 

 

I am getting below error in NAM-RTR logs

 ra-rtr Trace: (33 x 0 : 0 0) NewCall: CID=(150921,110), DN=6666, ANI=10002, CED=, RCID=5002, MRDID=1, CallAtVRU=1, OpCode=0
08:58:08:544 ra-rtr Trace: (33 x 0 : 16777226 0) Sent NewCall to CIC, AppGWID=5000.
08:58:08:546 ra-rtr Trace: (33 x 0 : 16777226 0) Handling DialogFail from CICR, Reason=11.
08:58:08:546 ra-rtr Trace: (33 x 0 : 16777226 0) DialogFail: Reason=11 CallState=8.

08:58:08:546 ra-rtr Trace: (33 x 0 : 16777226 0) No default label available for dialed number CVP1_RC.6666 (ID 5001). 
08:58:08:547 ra-rtr Trace: (33 x 0 : 16777226 0) Deleting Dialog.

Not sure what is this error about.

 

Everyone's tags (1)
4 REPLIES
Silver

Have you configured anything

Have you configured anything under "Dialed Number/ Script Selector list" settings?

HTH,

Dragan

HTH, Dragan
New Member

yes 6666 is the DNIS created

yes 6666 is the DNIS created at NAM as well CICM and mapped it with Call Type and Script as well...

Silver

Can this help:http://docwiki

New Member

There was an issue with VRU

There was an issue with VRU Type in the configration.... I chage it from Type 2 to Type 10 and it got resolved.

 

 

Thanks for your help....

 

Anil Kumar

 AT&T.

262
Views
0
Helpful
4
Replies
CreatePlease to create content