Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

UCCX 5.0 - 8.0 using pre-upgrade tool

Hi,

We're upgrading from 5.0(2) to 8.0. We've used the Pre-Upgrade Tool to create a TAR file on the production UCCX. From the replacement server we've selected "Upgrade from a previous UCCX release". The Pre-Upgrade Tool ran without issue and the log file shows no errors.

The status message shows: "Enter a valid backup file"

We know the sftp server is setup correctly and the user credentials are correct.

Any feedback welcome.Many thanks.

Everyone's tags (2)
2 REPLIES
Silver

Re: UCCX 5.0 - 8.0 using pre-upgrade tool

The Pre-Upgrade Tool also have the option to verify the backup file. Try running the verification and see if it works:

(page 16 - Upgrade guide)

http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/installation/guide/uccx801ig.pdf

Also what are the exact UCCX versions 5.0(2) SR? and going to 8.0(1) or 8.0(2)? there is one upgrade tool for 8.0(1) and another for 8.0(2), make sure you are running the right one.

Pablo

New Member

Re: UCCX 5.0 - 8.0 using pre-upgrade tool

we had a TAC case open.

SFTP Server, Username & Password were correct.

In the path we had to put in:

/

2376
Views
0
Helpful
2
Replies