I am building new UCCX 5.0(2) servers. I purchased new HP DL 380 G5's as per Cisco Server Spec sheet HP Part#417456-001 and I get fatal error upon install when it comes time for OS to install raid controller. I have confirmed that all parts are nailed down to the spec sheet. Anyone else have this problem? Here is the exact error:
The configuration of the array controller failed. This can be caused by unexpected hardware or a hardware failure within the system. Error code 2822
It is unsupported hardware. Have them make sure they have all required hardware for the support for OS 2000.4.4 install. If the system is hacked to support the larger drives it will not be supported. But You tried to install 6.11 on 5 different machines? The DL 380 G5 is supported for 4 / 5.X and 6. Is it possible to install an older version, and upgrade later?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...