Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UCCX 7.0 HA deployment question

Hi,

I have installed UCCX 7.0 in a HA deployement Scenario.I have noticed that my CAD are registred with my database subscriber and failing over to my database publisher. Is that a normal behaviour? Can I instruct my CAD to register with publisher and to fail over to the subscriber?

Please advice.

Best Regards,

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: UCCX 7.0 HA deployment question

Hi,

It depends on the order specified in Postinstall.exe.

On the client PC run the postinstall.exe(c:/programfiles/cisco/desktop/bin/postinstall.exe) and the first screen lists the ip addresses of the primary and secondry UCCx server.


At this point the subscriber ip address might be the first preference so you can change the order there and then check.

HTH

3 REPLIES
Cisco Employee

Re: UCCX 7.0 HA deployment question

Hi,

It depends on the order specified in Postinstall.exe.

On the client PC run the postinstall.exe(c:/programfiles/cisco/desktop/bin/postinstall.exe) and the first screen lists the ip addresses of the primary and secondry UCCx server.


At this point the subscriber ip address might be the first preference so you can change the order there and then check.

HTH

New Member

Re: UCCX 7.0 HA deployment question

Thanks Rajiv. You're right.

Best Regards,

Cisco Employee

Re: UCCX 7.0 HA deployment question

My Pleasure

HTH

Rajiv

488
Views
5
Helpful
3
Replies