Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UCCX 8.0.2 - Call in stuck with Agent status ready

Hi Guys,

I would like know what is the best log about RTMT I can use to analyze the calls stayed stuck with agent. Was verified in Real Time Report that there are agent available (state ready), but, the call was transfered for queue.


Thanks

Wilson                  

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

UCCX 8.0.2 - Call in stuck with Agent status ready

To find the root cause of stuck calls you need to Check MIVR/CCX engine logs

below is the link to read MIVR/CCX engine logs

http://docwiki.cisco.com/wiki/Guide_to_reading_MIVR_logs_for_Telephony_Issues_-_ICD_Call_Flow

I hope this will help

5 REPLIES
Cisco Employee

UCCX 8.0.2 - Call in stuck with Agent status ready

To find the root cause of stuck calls you need to Check MIVR/CCX engine logs

below is the link to read MIVR/CCX engine logs

http://docwiki.cisco.com/wiki/Guide_to_reading_MIVR_logs_for_Telephony_Issues_-_ICD_Call_Flow

I hope this will help

Cisco Employee

UCCX 8.0.2 - Call in stuck with Agent status ready

Normally this could be because some misconfiuration in script or some unsupported configuration on phone

for more information check below link

http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00801c82ea.shtml

New Member

UCCX 8.0.2 - Call in stuck with Agent status ready

Hi Ravi,


Thank You for your contact. The problem is sporadic and occurred each 03 months, 06 months more or less. I don´t believe that is problem about configuration script or phone, but, I will follow your recomendation about collect RTMT to identify the problem when came back again.

Thanks,

Wilson

UCCX 8.0.2 - Call in stuck with Agent status ready

I have a similar issue, any recommendation ?

New Member

UCCX 8.0.2 - Call in stuck with Agent status ready

Hi Philipe,

Unfortunatelly not was possible identify the root cause. I had already case in Cisco TAC, but, not have solution. As workaround, first I clear the stuck calls and the second restart the Engine.

Thanks,


Wilson

399
Views
0
Helpful
5
Replies
CreatePlease to create content