Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UCCX 8.5 System parameters partially displayed in app admin

Hi all
we have a problem with a 2 node UCCX 8.5 deployment.
The System Parameters Configuration page in app addmin displays only a few fields that are not editable. For example we cannot view historical reporting field and others.
Also an error message is shown 
"** -Error while reading the data. Please look into logs for more information."

Regards

Everyone's tags (1)
6 REPLIES
Super Bronze

HiHave you tried logging in

Hi

Have you tried logging in to the alternate node to  see if the problem shows there as well?

If not, try that. 

If you have, post up your MADM logs covering the time you access the page.

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

HI Aronfirst of all, thank

HI Aron
first of all, thank you.

Same behavior on the alternate node.
To tell the truth, something similar also happens in Cisco Unified Serviceability.

MADM log in attach.

Regards

Super Bronze

HiIs this a new deployment,

Hi

Is this a new deployment, or in production?

I see a lot of error entries in there suggesting DB connection issues to XFUCCX02.

I would first verify that name resolution is working correctly between the nodes:

  • From each node, ping the other by hostname only (e.g. utils network ping xfuccx02)
  • From each node, ping the other by FQDN (e.g. xfuccx02.whatever.com)
  • From each node, 'utils network host x.x.x.x' where x.x.x.x is the IP of the other node

Also do both nodes show all the services as up?

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Hi Aaron From each node, ping

Hi Aaron

 

  • From each node, ping the other by hostname only (e.g. utils network ping xfuccx02)
    OK!
  • From each node, ping the other by FQDN (e.g. xfuccx02.whatever.com)
    NOT OK!
  • From each node, 'utils network host x.x.x.x' where x.x.x.x is the IP of the other node
    OK!

Both tho nodes have Application Manager and RmCm Subsystem in partial service. All other servrices are ok.

 

Regards

Super Bronze

HiSo for the second test you

Hi

So for the second test you can't ping by FQDN? If not, you should check your DNS setup - suffixes assigned to the servers, records in the DNS server etc.

On the third test, do you see the proper FQDN returned when you do the host lookup? 


Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

 Hi Aaronsorry for the delay

 

Hi Aaron

sorry for the delay in my answer
Maybe we have a problem with DNS configuration.

At the moment we are dealing with the resolution of this problem.

Thank you for now.

Kind regards.

142
Views
0
Helpful
6
Replies
CreatePlease login to create content