I understand in CCX 8.X and above you can only write to the customer folder. I have a client that recently migrated from CCX 7.x to 9.x. They have a script for prompt recording; two of the options are to Save Backup of Existing prompt to a "saved" folder and the other is to Revert to Saved prompt. The 7.X script used a Create File Document step to write the prompt to a location; and then upload that prompt to the Saved folder. The Create File Document step is no longer working (get an error saying file and/or path not found when doing reactive debug) and I believe it has somethign to do with the fact you can only save to the customer folder. Any suggestions on what step should be used to accomplish this? Attached is screenshot of that section. Any help would be greatly appreciated. Thanks!
You can Write to the Repository..it just has to be done as an Authenticated User...and the FilePath is different than in 7.x (FolderName/FileName.wav)
Attached is a screenshot of what it may look like; I've never performed the operation of "backing" up the old recordings as your requirement is based on...so I think I'll leave that part alone in this particular response...If you need further assistance..I could help you better if you drop your script here so I can make suggestions and/or modifications as necessary..without making to many major changes to the app (I have ideas of how I would work with the existing files and then before I saved the new one..grab the old one and upload it to the backup FilePath..
The Authenticate Step is in the Wrong Location, You are Still Using Write Document Step (which can work..but not in the way you would want a prompt recording app to), You are Still Referencing C:\, None of the Prompts Work for App Navigation [PromptFolder/Prompt.wav]..so the app doesn't work at all in its current state...
If you can fix some of these..get a working app together (you can at least navigate)..then I might be able to help further..
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...