Has anyone heard of a situation where CAD is auto answering calls? The users are reporting it sporadically only when they get a off a call and a call is waiting in queue, the call will automatically connect right after they hang up the first call.
Sounds bizarre, I know.
Short of restarting services, i'm not sure where to go with this one. I've had a couple clients report this issue to me. They are running UCCX 9.0 (2) SU1
We've had a similar issue. While the agent is talking, the CAD changes state to "work" i.e. it thinks that the call has been hung up. It then goes to "ready" while the agent is still talking. As a result, when the agent hangs up their call, they are in "ready" state and are given the next call immediately.
You may want to check if this is the case with the agent state.
If the state changes are happening like this, check that the handset is snugly sitting on the cradle, reboot the client PC and have them log off/on the phone.
Be sure also to check the CAD agent logs. I'm about to check ours now to see if they show anything up.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...