There are 50 DDI that get routed to a group of Agents (who are all in the same CSQ). Each DDI is asscoaited with a different Campaign and the requirement is for the Agent to know which campaign the caller is enquiring about.
Can UCCX be configured so that for each DDI/Application, the Campaign associated with the DDI/Application displays on CAD.
For example DDI 1/Application 1 - Campaign 1 is displayed on the CAD screen.
For DDI 2/Application 2 - Campaign 2 is displayed on the CAD screen....etc
Yes. Within the script you need to assign enterprise data that will be displayed in CAD. It would probably be easiest to use a Match step and match the JTAPI trigger the contact arrived on. The enterprise data variable will show the agent what you set it to when the contact is being offered, assuming you have included in their layout list.
Enterprise Data is discussed within the documentation. There are many threads on here about it as well (run a search). Here's one crash-course response I provided:
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...