We have uccx 126.96.36.19900-75 (works good) and paid license
Package: Cisco Unified CCX Enhanced
Total IVR Port(s): 100
Cisco Unified CCX Enhanced Seat(s): 5
High Availability : Disabled
Cisco Unified CCX Maximum Agents: 400
Current License MAC of the node: xx
I recently noticed warning on main page
License Warning: The 60 day license grace period has been expired. The Unified CCX system is no longer functioning until a proper license is uploaded. Please refer to the Administration Guide of the system on obtaining a valid license.Please refer to License Display page for more information.
It looks a cosmetic message to me as your license display shows 5 enhanced seats wherein Demo License gives 25 seats by default. This means you have uploaded the permanent license on system but the message is still shown. Go to CCX Administration >> System >>License Information and from the drop down look at the uploaded licenses. If you have a license file there which shows Permanent Uncounted with correct License MAC that means it is a cosmetic thing and a reboot of system should clear this up. One more thing to check here is that the License MAC showing in this license file show match the one that shows up when you run "show status" command from primary UCCX CLI. You can also verify the license count by issuing "show uccx license" from CLI.
In case the license MAC in the file that you have uploaded is different to one that you get as the output of show status then please contact Cisco Licensing and get the license rehosted to the new MAC.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...