I am running a cluster of 02 UCCX servers version 5.02. Suddenly since one week ago the subcriber is no more able to boot.
I first install the windows server 2003 standard Edition on it, but when I began the installation of the CRS software, this installation fails and was requiring a cisco server.Then I restart the server with the OS 2003.1.2 provided with the UCCX servers and the installation is not going through; when the system restarts, the installation process restarts from the beginning. I then remove the DVD OS 2003.1.2 and try to start the system from the hard disk, I encounter the following error: "NTLDR is missing". Please, could someone help me put up this subscriber? As you know my system is now just running with the UCCX publisher and this situation is not very secure.
The server I'm using is a MCS 7835-H2 provided by cisco.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...