if you got this bundle with ccm8.5 sure this packages comes with free 5 agent enough to setup auto attendant and also with 5 agent but you should ensure that PAK comes with it for uccx if not contact the order respon. person to get it as it should come with the bundle its free
I have ordered it too. But did u order the PAK separately as my part numbers above? will the 5 seat free bundle work without it?
This is from the ordering guide
PLEASE NOTE: entitlement for the underlying appliance operating system and database has never been included as part of the bundle and to be purchased separately (see below) at a $2,995 UDS List Price. In releases prior to 8.0 the bundle Product Authorization Key (PAK) was attached to the bundle media kit included with the Unified Communications or Unified Communications Manager Express order. In 8.0 and 8.5 the bundle license PAK is no longer attached to the bundle media kit. Instead the PAK is attached to the entitlement Product IDs shown below. These entitlement Product IDs can be configured using the top level add on PRODUCT ID CCX-85-BDL-ADDON and CCX-85-BDL-UPG and must be ordered to obtain the Product Authorization Key for the bundle licenses as well as the entitlement to the underlying appliance operating system and database.
Just to provide some historical context when CallManager ran on Windows rather than the Linux appliance it was possible to install UCCX (or IPCC Express as it was then called) co-resident on a CallManager server. If you were happy with this there was no need to buy any additional parts as IPCC Express just used the operating system and database that you had already paid for by buying CallManager.
One of the few downsides of CallManager moving to Linux was that the co-residency was no longer possible so you had to pay for the server OS and database to host UCCX.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...