You can use the /p option to create a global password. If you do not use the /p option,the password is reset to null.
I'm looking to run this myself shortly. The only caveat with this info is that its extracted from the section related to ICM5 and migration from multiple to single forest ... so possibly not the correct info. However, there's not much documentation on this as you've seen!
Re: Upgrade from ICM 6 to 7 (TR) -- Domain conversion tool / UMT
Thanks for the reply, last night after posting this I tried the Export and the Convert but it didnt work (see output below).
I have a couple of questions:
1. Does ICM need to be installed in the servers before running this?
2. Can I just import the users using Active Directoy tools and the exported csv file?
We're doing a Technology Refresh (new hardware, new W2K3 single-forest, single-domain, etc) Our goal is to get to 7.5 with CVP 7.x but first we need to get to 7.0 to be able to jump to 7.5. We are currently running 6. We have a Rogger (Router / Logger) which is also our DC for the W2K active directory domain.
this is the output when I run it on the Ver7 DC:
C:\CiscoUtils\domaincnvtool>domcvt /DB:xxx_sideA /M:C /F:ssc_ver6.txt /OD:xxxx /ND:xxxx Unable to open CurrentVersion key in the registry. Make sure that the database name is correct and that the instance is installed
Take a look at the Logger Technology Refresh Upgrade: Side A/B section of the Upgrade Guide Cisco ICM/IPCC Enterprise & Hosted Editions and you'll see the domcvt section is towards the end of the Logger install.
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...