We are migrating our Cluster from Verison 7 to Version 9. We have the major CUCM issues addressed but would like to some input from those who have migrated UCCX from 7 to 9. Clearly some of the Scripts in Version 7 with c:\ file references will not run in 9. So how best to migrate a prodcution system? We had hoped to bring up the Version 7 UCCX on the new Version 9 CUCM but that looks like a dead end. If you have tackled this before we would welcome your comments.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...