Hi: I posted this conversation in the developer forum, but I can see it, so, I post again here.
CVP Call server 4.0.2
Comprehensive Call Flow
I don't have the license for the VXML Server yet, so, I decide to implement my own VXML Server. I set the Run External Script node on ICM to hit my Internet Information Server, then, my web server has to return a VXML Document (exactly as the VXML Server do)
1) I would need a sniplet of VXML Document generated when you invoke the VXML Server from the ICM Script using the Run External Script node.
In the VXML Studio I know you have to start with a Subdialog_Start and end with a Subdialog_Return. Well, I need the VXML document generated by these steps.
2) I tested return from my web server the following XML.
(Monitoring the script on the ICM it has no return error, but it does not go to the following node. I suppose because it does not have the subdialog return code.
I love if someone can tell me how to modify this XML to makes it work.)
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...