If you see the user list as part of the feature control, you should be able to add the user as long as the aw client can access the domain controller. Did you try directly on the AW client server when you are logged into the IPCC Domain?
Thanks, when you told about domain, i think it's the problem, cause i didn't include icm and CRS/Callmanager machines in our production domain,cause these machines are separate workstation machines which are only for lab goals..
Should I create domain for just mentioned machines (or include in production domain) with its own DNS server or in terms of IPCC, IPCC domain is something else?...
CRS and callmanager need not be in the domain. They can be in some other workgroup. Doesn't matter. The ICM stuff needs to be able to access the IPCC Domain in case you want to configure stuff. So, basically, add those servers to the domain. and then login to the domain. Then, AW client should work. For ICM servers, DNS Servers will be the domain controllers
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...