Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

ESX boot failure because of "Failed to load lvmdriver"

ESX/ESXi won't boot up correctly when there is no available NIC that ESX/ESXi can support.
At that time, "Failed to load lvmdriver" is output and ESX/ESXi moves to recovery mode.

On UCS C250, all NICs may be disabled after BIOS upgrade, and this problem may occur.
https://supportforums.cisco.com/docs/DOC-14724

esx-bootup.JPG

2620
Views
0
Helpful
0
Comments