Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to reboot a Cisco 6248 Fabric Interconnect

Example:

If you need to reboot a 6248 Fabric Interconnect manually here is one method of doing so.  Let's say your have a clustered pair and you need to reboot the subordinate.  One Method would be to SSH the UCS CLI and type the following command to connect to the subordinate: 

UCS-Fabric-A#connect local-mgmt b

this will bring you to the following

UCS-Fabric-B#

From here you can type the command "reboot"

Hope this helps. 

22700
Views
30
Helpful
0
Comments