Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Nexus 5548-UP with N55-M16P

Hi All,

I just want to confirm the following scenario with all you other Cisco guys.

Client has bought a N5548UP switch with a N55-M16P module (NOT Unified), I know on the UP switches that you need to configure the FC ports from the last available port - ie port 32, downwards. I'm assuming this will be ok because the requirement is to work backwards on the slot (rather than the entire switch which might see the last port on the module as the last available port).

In summary, I want to confirm this scenario works:

N5548 Slot 1, Port 1.. Port x (ie 27)... Ethernet

N5548 Slot 1, Port x+1 (ie 28) .. Port 32 .. FC

N5548 Slot 2, Port 1 - 16 Ethernet.

Thanks,

Nick.

Everyone's tags (2)
1193
Views
0
Helpful
0
Replies
CreatePlease to create content