Recurrent temperature minor alarm in one fabric module - Nexus 7010
I'd like to know what corrective actions should be taken when one (just one) module in a nexus 7000 suffers a recurrent temperature increasement that generates a minor alarm. The official documentation only suggests to check the show environment output, but it doen not says what to do after you have make sure that the module temperature is upper than the min threshold. It would be very helpful if Cisco'd include some actions to take, like checking the air filters, for example.
Recurrent temperature minor alarm in one fabric module - Nexus 7
I am experiencing this at the moment. One fabric module xbar3 on one of an identical pair of nexus7010 is having this problem. I had the thought over the holiday about the filter on the front of the chassis. Came in this morning and gave the filter a good hoovering. Am keeping an eye on the situation, though so far the modules are cool to the touch whereas previously hot.
L3Out en ACI
El siguiente documento describe la definición, configuración y comportamiento de L3Outs en ACI, El documento incluye diversos ejemplos e información detallada sobre los objetos necesarios para hacer uso de los L3Outs en diferentes situ...