03-18-2014 05:12 PM - edited 03-13-2019 08:31 PM
AppSpace 5.0.3
DMP4310 - NEC X55 talking over RS232
AppSpace has come out with their ADM - Advanced Device Manager. I am using this to communicate to my
DMP4310G - I am trying to schedule a screen to - 8am turn on and a 5pm turn off.
I schedule it, wont work..
but
I can make it work if I click on immediate
- instead of schedule - then it works.
Solved! Go to Solution.
03-21-2014 01:56 AM
Hi Grant,
Instead of using ADM try using player properties for this...
Below are the player properties to use. The NEC codes I have used in the example will need to be changed with the HEX codes you have.
NEC On-off codesCommand Value
============================================================================
Display.Screen Burn Mode 1
Display.Screen Burn OFF Command 01304130413043024332303344363030303403760D
Display.Screen Burn ON Command 01304130413043024332303344363030303103730D
Display.Screen Burn Time 14:29, 14:32
P.S.
03-21-2014 01:56 AM
Hi Grant,
Instead of using ADM try using player properties for this...
Below are the player properties to use. The NEC codes I have used in the example will need to be changed with the HEX codes you have.
NEC On-off codesCommand Value
============================================================================
Display.Screen Burn Mode 1
Display.Screen Burn OFF Command 01304130413043024332303344363030303403760D
Display.Screen Burn ON Command 01304130413043024332303344363030303103730D
Display.Screen Burn Time 14:29, 14:32
P.S.
11-16-2014 06:28 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: