Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AppSpace Rs232

AppSpace 5.0.3

DMP4310 - NEC X55 talking over RS232

AppSpace has come out with their ADM - Advanced Device Manager.  I am using this to communicate to my

DMP4310G - I am trying to schedule a screen to - 8am turn on and a 5pm turn off. 

I schedule it, wont work.. 

but

I can make it work if I click on immediate

- instead of schedule - then it works.

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Hi Grant,Instead of using ADM

Hi Grant,

Instead of using ADM try using player properties for this...

Below are the player properties to use. The NEC codes I have used in the example will need to be changed with the HEX codes you have.

NEC On-off codes
Command                         Value
============================================================================
Display.Screen Burn Mode          1 
Display.Screen Burn OFF Command          01304130413043024332303344363030303403760D 
Display.Screen Burn ON Command          01304130413043024332303344363030303103730D 
Display.Screen Burn Time          14:29, 14:32  

 

P.S.

2 REPLIES
New Member

Hi Grant,Instead of using ADM

Hi Grant,

Instead of using ADM try using player properties for this...

Below are the player properties to use. The NEC codes I have used in the example will need to be changed with the HEX codes you have.

NEC On-off codes
Command                         Value
============================================================================
Display.Screen Burn Mode          1 
Display.Screen Burn OFF Command          01304130413043024332303344363030303403760D 
Display.Screen Burn ON Command          01304130413043024332303344363030303103730D 
Display.Screen Burn Time          14:29, 14:32  

 

P.S.

Hi Grant, Can you please let

Hi Grant,

 

Can you please let me know the procedure on how you deployed. It will be of great help.

 

I am trying on both Cisco DMP 4310 and Edge 340, but getting the attached response

Kindly help.

Regards,

Shabeer

490
Views
10
Helpful
2
Replies