Just plugged in the new server for the DMM and went through the setup, but it didn't promt for the Video Portal setup. We tried to connect to it via the web browser and cannot. Not sure were we went wrong?
This link to the set up are the directions that I followed, and it never showed the video portal setup on the appliance. It just had the DMM setup. This is a brand-new set up, we've never worked with this before.
And I didn't realize there is supposed to be a second appliance for the video portal. I got the impression that it was all on the same appliance. This could be an issue. Thanks.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...