Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

DMM SMTP non port 25

New installation of DMM 5.2

Customer's smtp server does not use port 25 to accept mail.

Is there a way to tell DMM to use a different port?

Thanks

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: DMM SMTP non port 25

Please log in to your DMM appliance and start DMS-Admin. Then, do the following.

Configure  SNMP Server Settings for Your DMM Appliance

Cisco DMS  can convey its notifications to an external SNMP server.

Procedure


Step 1 Choose Settings > SNMP.

Step 2 Click the Server Status radio button to enable or  disable SNMP monitoring.

Step 3 Enter in the Host field the routable IP address or  DNS-resolvable hostname of your NMS.

Step 4 Enter in the Port field the numeric UDP port  assignment reserved for SNMP traffic.

Step 5 Apply the community string.

a. Enter in the Community String  field the password to identify that community.


Tip The default Community String  value is public.


Step 6 Click Save.

Step 7 Stop. You have completed this procedure.

2 REPLIES
New Member

Re: DMM SMTP non port 25

Please log in to your DMM appliance and start DMS-Admin. Then, do the following.

Configure  SNMP Server Settings for Your DMM Appliance

Cisco DMS  can convey its notifications to an external SNMP server.

Procedure


Step 1 Choose Settings > SNMP.

Step 2 Click the Server Status radio button to enable or  disable SNMP monitoring.

Step 3 Enter in the Host field the routable IP address or  DNS-resolvable hostname of your NMS.

Step 4 Enter in the Port field the numeric UDP port  assignment reserved for SNMP traffic.

Step 5 Apply the community string.

a. Enter in the Community String  field the password to identify that community.


Tip The default Community String  value is public.


Step 6 Click Save.

Step 7 Stop. You have completed this procedure.

Bronze

Re: DMM SMTP non port 25

Log into the DMM Web-GUI and Navigate to Administartion Module --> Settings --> SMTP and configure the Server IP address and custom port number.

Hope this helps.

Regards,

Sagar Dhanrale

561
Views
0
Helpful
2
Replies
CreatePlease to create content