I would like to know if the 4400 can control a television? Having the ability to change iputs, turn on/off from the user interface. So there is no need to go to the TV and make that adjustment. I see that there is an IR output that goes from the 4400 to the TV.
No there is no converter you can use. In order to take advantage of this feature you must be using commercial or professional grade LCDs with RS232 Ports for the transfer of those hexidecial codes that control Display functions. The control of the LCDs is actually an application function of the DMM but the commands are transfered to the display through the DMP. NEC and Cisco LCDs are native but other makes and models can be prorammed if you know the hex codes for the display.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.