I am facing a synchronization problem. I have a wall of 12 DMPs connected to 12 LCD screens. Whenever I pull a video to those DMPs from the DMS, they are synchronized for maximum 1 or 2 minutes. After that delays occurs in between. After a while, it looks like each screen is playing alone.
I have the same issue. The best solution I've found is to program a single DMP to playback a scheduled presentation or playlist, output the video feed from that DMP into a live multicast stream, then program the other DMPs to tune to that stream. It is a bit of a workaround but keeps them more or less in sync.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...