Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DMS 5.2 and Live Feed Playback on DMP

Hi all,

Is there any way to play a live stream (e.g from a DME ) directly to DMP through Digital Signs?

Thank you.

Everyone's tags (6)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: DMS 5.2 and Live Feed Playback on DMP

The DME supports the following live-streaming formats:

- Microsoft Windows Media

- MPEG-4/H.264

The Cisco Digital Media Player 4400G integrates with the Cisco Digital Media Manager to deliver:

Standards-based video codec support with MPEG1, MPEG2, and MPEG-4 Part 10, and MP3 audio, all deliverd within MPEG-2 TS over User Datagram Protocol (UDP) or RTP over RTSP (RTP over TCP) in both standard- and high-definition (SD and HD, respectively) formats

The key here is MPEG-2 TS.  The DME encoders do not do this.

Options:

- Purchase an Encoder (ie. Scientific Atlanta) that supports MPEG-2 TS.

- Use a Transcoder to INGEST the Windows Media Stream(s) from the DME and

  Transcode the WMV Live stream to MPEG-2 TS Stream.

If this answers your question, Please take time to mark this

discussion answered & rate the response.


Thank You!


T.

1 REPLY
Cisco Employee

Re: DMS 5.2 and Live Feed Playback on DMP

The DME supports the following live-streaming formats:

- Microsoft Windows Media

- MPEG-4/H.264

The Cisco Digital Media Player 4400G integrates with the Cisco Digital Media Manager to deliver:

Standards-based video codec support with MPEG1, MPEG2, and MPEG-4 Part 10, and MP3 audio, all deliverd within MPEG-2 TS over User Datagram Protocol (UDP) or RTP over RTSP (RTP over TCP) in both standard- and high-definition (SD and HD, respectively) formats

The key here is MPEG-2 TS.  The DME encoders do not do this.

Options:

- Purchase an Encoder (ie. Scientific Atlanta) that supports MPEG-2 TS.

- Use a Transcoder to INGEST the Windows Media Stream(s) from the DME and

  Transcode the WMV Live stream to MPEG-2 TS Stream.

If this answers your question, Please take time to mark this

discussion answered & rate the response.


Thank You!


T.

1084
Views
0
Helpful
1
Replies