Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to access the MIB on DMP 4400g w. #5.2

We replaced our 4305 with a 4400g, using the latest software version #5.2

According to the DMP's manual you can access the MIB on the DMP by http://<ip.address>:7777/get_param?p=xxxxxx

The 4400 does not return anything.

Is any idea out there, what is the reason?

Regards,

Andras

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: How to access the MIB on DMP 4400g w. #5.2

This works fine for me...

Which web browser are you using?

Is there are firewall between you and the DMP?

Is there are firewall between the DMM and the DMP?

this is the same command the DMM sends to the DMP...


T.

8 REPLIES
Community Member

Re: How to access the MIB on DMP 4400g w. #5.2

If you are trying to access the DMP 4400 having the version 5.2 you need to use https instead of http. Try the following command and it should work.

https://:7777/get_param?p=xxxxxx

Community Member

Re: How to access the MIB on DMP 4400g w. #5.2

I tried and it failed. It timed out w/o ever asking for id/pw.

Is there any way to provide the id/pw together with the GET?

Andras

Cisco Employee

Re: How to access the MIB on DMP 4400g w. #5.2

Try this example and see if it works...

  https://admin:default@a.b.c.d:7777/get_param?p=init.version

  admin   = DMP Web Account Username
  default = DMP Web Account Password
  a.b.c.d = IP Address of DMP

Your URL test did not include the user\password...

T.

Community Member

Re: How to access the MIB on DMP 4400g w. #5.2

I get the same answer > times out.

Have you tried it?

(I do not know if the https port is open or not via my firewall), Could it be an issue?

Cisco Employee

Re: How to access the MIB on DMP 4400g w. #5.2

This works fine for me...

Which web browser are you using?

Is there are firewall between you and the DMP?

Is there are firewall between the DMM and the DMP?

this is the same command the DMM sends to the DMP...


T.

Community Member

Re: How to access the MIB on DMP 4400g w. #5.2

Are you using the DMPs in Standalone or managing them through the DMM?

If the later, you should be able to get a dump of the mib by doing the System Task of Status on a selected DMP.

Community Member

Re: How to access the MIB on DMP 4400g w. #5.2

Richard,

Thanks for the follow up. The problem was resolved by using https vs. http. Since the 4300 accepted http, I tried the same method as I used earlier.

Andras

Community Member

Re: How to access the MIB on DMP 4400g w. #5.2

1375
Views
0
Helpful
8
Replies
CreatePlease to create content