Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to do a password recovery for a DMP 4400G?

Hi guys!:

I have a DMP that was in use but now I need to do some changes and we don't have the login information (username and password). I already try with the reset "button" but nothing happened, is there a way to do a factory reset through console port? Thank you in advance and have a nice day.

Regards,

Karla

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: How to do a password recovery for a DMP 4400G?

Morning Karla,

The hard reset on teh DMP-4400 should have worked - Lets try it out one more time as follows :

1)     Make sure the DMP is connected to the DHCP enabled LAN and Powered on.

2)     Turn the DMP around and locate the “Reset” button on the back panel.

3)   Take a sharp object (such as a Pen, etc) and press the reset button.

4)     Here is the key - Keep the reset button pressed for at-least 20 seconds,  release the reset button. At this point you should see both the LEDs solid

5)   Wait for 10-15 seconds - At this point the DMP is restored to factory default.

6)     Try connecting to the DMP usinghttp://> or https:// depending on the code version 5.0/5.1 or 5.2.x

7) The default credentials for 5.0 and 5.1 DMp firmware is admin/default and for 5.2.x firmware is admin/Cisco123

Let us know if this helps.

Regards,

Sagar Dhanrale

5 REPLIES
Bronze

Re: How to do a password recovery for a DMP 4400G?

Morning Karla,

The hard reset on teh DMP-4400 should have worked - Lets try it out one more time as follows :

1)     Make sure the DMP is connected to the DHCP enabled LAN and Powered on.

2)     Turn the DMP around and locate the “Reset” button on the back panel.

3)   Take a sharp object (such as a Pen, etc) and press the reset button.

4)     Here is the key - Keep the reset button pressed for at-least 20 seconds,  release the reset button. At this point you should see both the LEDs solid

5)   Wait for 10-15 seconds - At this point the DMP is restored to factory default.

6)     Try connecting to the DMP usinghttp://> or https:// depending on the code version 5.0/5.1 or 5.2.x

7) The default credentials for 5.0 and 5.1 DMp firmware is admin/default and for 5.2.x firmware is admin/Cisco123

Let us know if this helps.

Regards,

Sagar Dhanrale

New Member

Re: How to do a password recovery for a DMP 4400G?

Hi!:

Thank you sooo much! Is working now . Sorry for take too long to post this message, I was a little busy but your solution worked. Have a nice day.

Regards,

Karla

New Member

How to do a password recovery for a DMP 4400G?

hi.

I have a DMP 4400G that was registered on a DMM5.2 version, and i want to upgrade the DMP version to a 5.3 software.

The issue is I dont have the credential to get into the DMP via web, i dont know the ip address, so, i think i should do a hardware reset.

I did the procedure above for the factory reselt but it seems not working. I have the DMP connected to a LCD and nothing appears.

What else can I do?

Bronze

How to do a password recovery for a DMP 4400G?

Yusset,

Few Questions :

What happens when you reboot the DMP ?

Do you see a Cisco Splash screen on the TV ?

What is the status of the LEDs on the front panel (right side) - Are the LEDS solid RED and GREEN ?

Do you know if the LAN is DHCP enabled ?

Was this DMP working fine before you resetted it ?

If both the LEDs are solid lit, that indicates that the DMP is unable to get a DHCP address. Have you unplugged the DMP and tried it on a different LAN ? Possibly with different cable ?

How long did you keep the reset button pressed ?

Thanks,

Sagar Dhanrale

New Member

How to do a password recovery for a DMP 4400G?

Hi Sagar

thanks for your help

I  missed to connect the LAN cable. By the moment I did it, the DMP start to display the home screen.

thanks

3371
Views
5
Helpful
5
Replies