Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to switch DSN & Cast using DMP Remote on DMM 5.2.1

Hi All,

would you please let me know how do we programe DMP remote control buttons to switch DSN (Digital Signage) & Cast ?

also let me know step by step if you could.

Thanks

Sinhara.

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: How to switch DSN & Cast using DMP Remote on DMM 5.2.1

Please elaborate on what you are trying to do.

The DMP remote control is used for navigation for Cast.

They can not be programmed and the remote would have

no effect on non-Cast presentation or video on a Digital Sign

Cheers


T.

6 REPLIES
Cisco Employee

Re: How to switch DSN & Cast using DMP Remote on DMM 5.2.1

Please elaborate on what you are trying to do.

The DMP remote control is used for navigation for Cast.

They can not be programmed and the remote would have

no effect on non-Cast presentation or video on a Digital Sign

Cheers


T.

Re: How to switch DSN & Cast using DMP Remote on DMM 5.2.1

i received below instruction from Cisco to programe remote

on DMP but it will not work on DMM 5.2. i need to find out correct configuration ?

--> RED Remote button to start a sign presentation

http://192.168.1.102:7777/set_param?irasrv.key_RED=ira add 1 sh 1 RED fg sendcmd 127.0.0.1:5555 "http://192.168.1.1:8080/xTAS-core/api/xml/app/playlist/start_playlist_37_.htm"

--> Instruct the DMP to start the ETV daemon

http://192.168.1.104:7777/set_param?init.BROWSER_CMD=http://192.168.1.1:8080/etv-flash-webapp/app/etv_22_.htm

--> Instruct the DMP to  start a sign presentation

http://192.168.1.104:7777/set_param?init.BROWSER_CMD=http://192.168.1.1:8080/xTAS-core/api/xml/app/playlist/start_playlist_37_.htm

Cisco Employee

Re: How to switch DSN & Cast using DMP Remote on DMM 5.2.1

Sinhara,

My apologies, I stand corrected.  I researched further and play around in my lab

to see if I could get this to work and I successfully configured the color buttons

similar to what you are trying to do.  This is what I found out.

VARIABLES

=========

  admin           = DMP Web Account Username

  default         = DMP Web Account Password

  a.b.c.d         = IP Address of DMP

  dmm.company.com = FQDN of the Digital Media Manager(DMM) Appliance

MIBS

====

** Use the Following MIB to see the CURRENT Remote Mappings

https://admin:default@a.b.c.d:7777/get_param?p=*.*&init.pop_enable=false

** Configure Buttons

RED

https://admin:default@a.b.c.d:7777/set_param?irasrv.key_RED=ira%20add%201%20sh%201%20RED%20bg%20wget%20-q%20%22localhost%3a7777%2Fset_param%3Finit.BROWSER_CMD%3Dwww.cisco.com%22

GREEN

https://admin:default@a.b.c.d:7777/set_param?irasrv.key_GREEN=ira%20add%201%20sh%201%20GREEN%20bg%20wget%20-q%20%22localhost%3a7777%2Fset_param%3Finit.BROWSER_CMD%3Dhttp://www.google.com%22

YELLOW

https://admin:default@a.b.c.d:7777/set_param?irasrv.key_YELLOW=ira%20add%201%20sh%201%20YELLOW%20bg%20wget%20-q%20%22localhost%3a7777%2Fset_param%3Finit.BROWSER_CMD%3Dhttp://www.yahoo.com%22

BLUE

https://admin:default@a.b.c.d:7777/set_param?irasrv.key_BLUE=ira%20add%201%20sh%201%20BLUE%20bg%20wget%20-q%20%22localhost%3a7777%2Fset_param%3Finit.BROWSER_CMD%3Dhttp://www.apple.com%22

ASSIGN A BUTTON TO CAST

https://admin:default@a.b.c.d:7777/set_param?irasrv.key_RED=ira%20add%201%20sh%201%20RED%20bg%20wget%20-q%20%22localhost%3a7777%2Fset_param%3Finit.BROWSER_CMD%3Dhttp://dmm.company.com:8080/etv-flash-webapp/app/etv_24_.htm%22

** Use the Following MIB to see the NEW CONFIGURED Remote Mappings

https://admin:default@a.b.c.d:7777/get_param?p=*.*&init.pop_enable=false

** Use the ADVANCED TASK to SAVE the DMP Settings.

I have tested these settings and they do work…

I hope this helps!

T.

Re: How to switch DSN & Cast using DMP Remote on DMM 5.2.1

Hi Tomas,

i hope correct url as per below for RED button. please confirm becuase i do not have DMM server at the moment i am going to deploy and test tommorow.

https://admin:default@a.b.c.d:7777/set_param?irasrv.key_RED=ira add 1 sh 1 RED bg wget -q "localhost:7777/set_param?init.Browser_CMD=www.cisco.com

would you please let me know the brief steps save above url on DMP via advanced task ?

Thanks

Sinhara.

Cisco Employee

Re: How to switch DSN & Cast using DMP Remote on DMM 5.2.1

I provided the correct URL syntax above.  the URL you added is still incorrect please use the

exact syntax i provided with your specific variables following the legend I provided.

You do not have to have this as an Advanced Task.  You can do this directly from the DMP.  You can

also directly access the DMP-DM web admin and save settings.  You do not need a DMM.  I was just

stating an example.  The main concept is to SAVE settings after configuration.

You can do this directly via URL also.

https://admin:default@a.b.c.d:7777/set_param?mib.save=1

Please refer to the online DMM\DMP documentation for exact steps if you are confused or need to know

a configuration step.

Cheers!

T.

New Member

Re: How to switch DSN & Cast using DMP Remote on DMM 5.2.1

Great information.  I have tested this in my lab and have it working as well.  Very cool. 

I have a couple of follow up question:

1) I have a playlist of items (either a native playlist or a playlist embedded within a presentation).  What I'd like is to have the Fast Forward / Rewind buttons hop between playlist items (and perhapse PAUSE stay on an item).   Do you know if this is possible?

2) I'd like to program one of the colored buttons to tune directly in to a channel (udp://239.10.11.44:2341) without going through ETV.  Any thoughts?

3) How can I have a colored button load the appropriate page to start playing a video?  For example I have a .MPG stored at http://my.example.com/files/test.mpg that I want the TV to play (and loop) full screen when GREEN is pressed.

Thanks!

1574
Views
5
Helpful
6
Replies
CreatePlease to create content