Sluggish playback of local presentation deployed on DMP 4400 (5.2.2)
Deployed my presentation (consisting of a playlist containing a few images) to the local storage on the DMP 4400. After directing the DMP to play the content from the generated go to URL, the screen draws are very slow. The images are not large, and I made sure they were saved as non-progressive jpgs. I've found suggestions for other folks having a similar problem, but none of the suggestions seem to work for my case. Streaming the content from the DMM, at this point, allows a much smoother signage experience. Any ideas how I can improve the performace of the local content playback?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...