In the Digital Media Designer there seems to be a character limitation with a text flow field entered into a presentation when you want to use the scroll function. We have had an issue with the DMD not allowing a presentation to be saved. We received the error:
"An error has occurred.
A presentation or a template with the same name already exists. Please use a different name."
When we drastically reduced the amount of text with the text flow field, we can save the presentation and everything works normal.
Does anyone know what the text flow field character limitation is for scrolling text? I cannot find any information in any Cisco documentation.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...