Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Which MPEG4 - Part2 format that DMP 4305G support?

Dear All,

I would like to know which MPEG4 - Part2 format that DMP 4305G support? Since I tried every codec

example.

     Standard MPEG4

     DivX

     Xvid

Can anyone help me or give me example file format so that I can get more information to convert file to play in DMP 4305G.

* I'm using DMP version 5.1

Thank you in advance

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Which MPEG4 - Part2 format that DMP 4305G support?

see below

4 REPLIES
New Member

Re: Which MPEG4 - Part2 format that DMP 4305G support?

Did you try Quicktime with a

*.mov file extension?

Re: Which MPEG4 - Part2 format that DMP 4305G support?

I know it has to be a transport stream encoded video and i belive it is .mpg.

New Member

Re: Which MPEG4 - Part2 format that DMP 4305G support?

see below

New Member

Re: Which MPEG4 - Part2 format that DMP 4305G support?

The only h.264 the DMP 4305 will support is MPEG 4 part 2 - Advanced Simple Profile (mp4v) @ Level 5. The file extension is *.mov.

The DMP 4400 will support MPEG 4 part 10 - (h.264) @ Level 5 which is a *.mp4 file extension. or MPEG-2 -TS/h.264 with a *.mpg extension.Supported Bit rate up to 15 Mbit/sec recommended
for HD: 12 Mbit/sec - 15 Mbit/sec
for SD: 5 Mbit/sec - 8 Mbit/sec

On both DMPs is supported a MPEG-2 Transport Stream at 720p for the full screen, and NTSС DV or PAL DV

I hope this helps.

Cheers

C.O. Little

1102
Views
0
Helpful
4
Replies