819 EEM to toggle DTR on serial port based on RSSI
I've been playing with EEM to turn a LED on/off based on the RSSI of a 3G radio. Currently I'm polling the snmp value for the radios RSSI and if it's worst then -91dBm then I toggle DTR off and turn off the LED, is the RSSI is better then -91dBm then I toggle DTR on and turn the LED on. The LED is connected to pins 2 and 4 of the aux port. Here is the EEM config:
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.