1) @ "Mar 1 00:34:14.023" time's log you will see that after enable command it don't go in to the "privilege mode" and be in the user mode so the command @ "Mar 1 00:34:14.051" - undebug all is not working.
2)Same thing is happening @ Mar 1 00:34:15.011 and router goes in to the privilege mode and undebug all command is working at that time.
There were many much fail offferd router did before Mar 1 00:34:14.023 which is not included in log.
Or is there any other way to achive this , like if CPU ulilization os more than 50% run the "undebug all" command
Or ican give priority to the EEM commands to overcome the debug
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.