No. Class Type Event Type Trap Time Registered Name 1 applet user track Off Mon Sep 8 20:33:19 2014 test track 1 state down maxrun 10.000 action 1.0 snmp-trap strdata "TRACK 1 DoWN DETECTED"
My question is:
- Do I need to set the applet to: event manager applet test trap? Do I need this so the trap action would work?
- When the tracked object goes down, will the EEM app continue to generate traps during certain intervals until the tracked object is down? Or will it generate only one trap on the first occurrence the object goes down?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...