event manager applet interface_eem_test event tag 1 interface name Multilink1 parameter rxload entry-op ge entry-val 50 entry-type value exit-op le exit-val 50 exit-type value poll-interval 10 action 1.0 cli command "enable" action 2.0 cli command "show ip flow top-talkers" action 3.0 mail server "10.0.0.0" to "email@example.com" from "EEM@tyco.com" subject "EEM_Top_Talkers_TEST_Router_test" body "Current Top Talkers $_cli_result" action 4.0 syslog msg "Increased Load On the Link"
Multilink1 is up, line protocol is up Hardware is multilink group interface MTU 1500 bytes, BW 3072 Kbit/sec, DLY 20000 usec, reliability 255/255, txload 15/255, rxload 94/255 <-- is higher than 50 so should run event
This seems to not do anything, curious what i'm missing? the mail server and e-mail is changed to hide info.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.