The attached script was created by someone from this community.
I was wondering if someone could take a look at it and let me know if it can be modified to allow multiple ping destinations? Also, can it be modified so as to send a syslog message or and email when the ping isn't successful?
You could get this script to ping 50 addresses. What you'd need to at the very least, though, is adjust the maxrun timer to take into account your ping timers. For example, with the timers above you should set your maxrun to 800.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...