Problem with TCl script

[peraocompany]

                   Hello I need help, my Cisco Router (2921) work not correct with tcl script.

Tcl script work fine on this device long time, but in one time script was not start get error(no any script changes):

005495: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl: Unknown error 2620

005496: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl:     while executing

005497: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl: "close $myfileid"

005498: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl:     invoked from within

005499: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl: "$slave eval $Contents"

005500: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl:     (procedure "eval_script" line 7)

005501: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl:     invoked from within

005502: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl: "eval_script slave $scriptname"

005503: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl:     invoked from within

005504: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl: "if {$security_level == 1} {       #untrusted script

005505: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl:      interp create -safe slave

005506: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl:      interp share {} stdin slave

005507: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl:      interp share {} stdout slave

005508: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl: ..."

005509: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl:     (file "tmpsys:/lib/tcl/base.tcl" line 50)

005510: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl: Tcl policy execute failed:

005511: Aug 26 08:46:27: %HA_EM-6-LOG: event.tcl: Unknown error 2620

If I try do command it not help:

no event manager policy event.tcl

event manager policy event.tcl

I try reload script in router, and every time then script was start, some part of script file was deleted (it very intrusting, because i think script in flash only read (not write))

Only reload help, auto reload script work fine.

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M6, RELEASE SOFTWARE (fc2)

[Joe Clarke]

Without seeing the Tcl policy, it's difficult to understand what might be going on.  While the stack trace is clear, I do not understand the rest of your problem.

[peraocompany]

hello Joseph, this TCL script work long time with out any problem and with out any changes.

On this device I change configuration (add two EEM aplet with event tag syslog pattern) auto this modification i have problem. May be I try do all my configuration on TCL script.

I add EMM (it work with out any problem): 

event manager applet RESET-3G-S

event tag 1.0 syslog pattern "%TRACKING-5-STATE: 2 ip sla 2 reachability Up->Down"

***

event manager applet 3G-EEM-STOP

event tag 1.0 syslog pattern "%TRACKING-5-STATE: 2 ip sla 2 reachability Down->Up"

***

My scipt have syslog patern:

::cisco::eem::event_register_syslog tag 1 pattern ".*SEC_LOGIN-4-LOGIN_FAILED: Login failed.*" occurs 1 maxrun 50
::cisco::eem::event_register_syslog tag 2 pattern ".*%SEC_LOGIN-5-LOGIN_SUCCESS: Login Success*" occurs 1
::cisco::eem::event_register_syslog tag 3 pattern ".*%SYS-5-RESTART.*" occurs 1

::cisco::eem::trigger {
::cisco::eem::correlate event 1 or event 2 or event 3
::cisco::eem::attribute tag 1 occurs 1
::cisco::eem::attribute tag 2 occurs 1
::cisco::eem::attribute tag 3 occurs 1

}

Tahnk you

[Joe Clarke]

Please post the full Tcl script.