I have an ASA 5506 running 9.5.2 with a primary ISP and a Backup ISP (LTE modem) attached. The ASA is set up with an IP SLA to automatically change the default route to the Backup ISP if the primary ISP fails and that seems to be working well. The ASA also has a port dedicated to a guest wireless AP and I would like to be able to automatically shut that port down if the ASA fails to the Backup ISP (since it is a metered connection) and re-enable it when the Primary ISP is back online. Is this something that could be accomplished with an EEM script?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...