Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Syslog Event Detector config

Hello,

I need an EEM applet to notify when a particular interface goes down (Cat 4k running 3.4.1).

I notice, event track command is not available under event manager.

track 1 interface GigabitEthernet0/0/2 line-protocol

event manager applet EIGRP-link-dampening authorization bypass

event track 1 state down

trigger occurs 2 period 120

action 1.0 cli command "Enable"

action 2.0 cli command "conf t"

action 3.0 cli command "Interface GigabitEthernet0/0/2"

action 4.0 cli command "shut"

citi_4k_acc2(config)#event manager applet EIGRP-link-dampening authorization bypass

citi_4k_acc2(config-applet)#event tr

citi_4k_acc2(config-applet)#event t?

tag  timer

How can I accomplish the same using syslog event detector.

Thanks,

Aman

1 REPLY
Cisco Employee

Syslog Event Detector config

Does the change in track state generate a syslog message?  I think the code is new enough that it would.  If so, plug that into the pattern argument to "event syslog".

717
Views
0
Helpful
1
Replies
CreatePlease login to create content