09-04-2013 03:42 AM
Hello Community,
We've been experiencing high utilisation on our interface, to the point where the rx is full saturated, see below:
ukxxxx-rm01-xx#show int atM 0/1/0
ATM0/1/0 is up, line protocol is up
Hardware is MPC ATMSAR, address is 6073.5cd8.95a6 (bia 6073.5cd8.95a6)
Description: Internet Connection
MTU 1600 bytes, sub MTU 1600, BW 448 Kbit/sec, DLY 820 usec,
reliability 255/255, txload 137/255, rxload 255/255
I decided to apply the attached script to determine what might be causing the saturation.
Can someone please help me interpet the output?
The culprit is the source ip 194.75.x.x to 80.229.x.x with prot ESP and AvgBits/s 1.19M and AVGpkt/s 175.
I don't know how to interpret the results...
Any explanation would greatly appreciated.
Cheers
Carlton
Solved! Go to Solution.
09-04-2013 01:02 PM
What specifically don't you understand in the output? The flows in question look to be VPN traffic between the two hosts.
09-04-2013 01:02 PM
What specifically don't you understand in the output? The flows in question look to be VPN traffic between the two hosts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide