Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Adding a new domain to be managed by Ironport

We have registered and configured on our NS a few new domains.
I need to know if I only need to add them to the Recipent Access Table and the SMTP routes, or if there's something else to be done.
DNS and LDAP server already know and manage these new domains - so I only need to know the Ironport side.

Thanks in advance

4 REPLIES
Community Member

Re: Adding a new domain to be managed by Ironport

When you add additional domains that your Ironport will be accepting mail for and scanning, you will need to configure those two things you mentioned:


1. On the GUI interface, click on "Mail Policies > Recipient Access Table"

- Add the new domain, ie. newdomain.com


2. Click on "Network > SMTP Routes"

- Add the destination host IP address that the Ironport will deliver mail to for the new domain.

-i.e.

newdomain.com 10.1.32.35


More than likely, you'll want to deliver it to a local IP address.

We have registered and configured on our NS a few new domains.
I need to know if I only need to add them to the Recipent Access Table and the SMTP routes, or if there's something else to be done.
DNS and LDAP server already know and manage these new domains - so I only need to know the Ironport side.

Thanks in advance

Community Member

Re: Adding a new domain to be managed by Ironport

One other thing, make sure your LDAP works for these new domains.

Go to "System Administration > LDAP". Go to the Accept query section and put in some sample recipient emails for the new domain, i.e

jsmith@newdomain.com

and make sure the results come back positive.

If needed, you can bypass ldap check on new domains/users if they are not yet in the Active Directory/domain controller.


We have registered and configured on our NS a few new domains.
I need to know if I only need to add them to the Recipent Access Table and the SMTP routes, or if there's something else to be done.
DNS and LDAP server already know and manage these new domains - so I only need to know the Ironport side.

Thanks in advance

Community Member

Re: Adding a new domain to be managed by Ironport

We have registered and configured on our NS a few new domains.
I need to know if I only need to add them to the Recipent Access Table and the SMTP routes, or if there's something else to be done.
DNS and LDAP server already know and manage these new domains - so I only need to know the Ironport side.

Thanks in advance





Well we work on C600 and what i do whenever i add a new Domain is following:

in GUI adding the Domain in

Mail Policy -> Incoming Mail Policy
Mail Policy -> Outgoing Mail Policy
Mail Policy -> Recipient Access Table (RAT)
Mail Policy -> Dictionaries
Network -> SMTP Routes



hope it could help u

Community Member

Re: Adding a new domain to be managed by Ironport

Thanks for the info- it all worked fine.

4213
Views
0
Helpful
4
Replies
CreatePlease to create content