We purchaed a C100 to be a DR solution for our C10. However, we decided to put the C100 into production and use the C10 for DR. I have since upgraded the C100 to 5.1.0-314. If I ever need to bring the C10 back online will I be able to use the config file from 5.1.0-34 on the C10 which has 4.7.1-011. I don't believe the C10 will ever be upgradeable to 5.x.
I guess I can just try it and see if there are any errors but thought I would throw it out here for discussion.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...