You can get the configuration and setup information from the standard configuration guides, use either the 8.0 or 8.0.1 for referenceable material --- or feel free to review the 7.6.3 guides (Daily Management, Configuration, or Advanced) for reference points. Most of your setup/configuration questions can be answered from within the guides.
If you requested the demo license through Global Licensing (GLO) - the feature keys provided can be see from 'featurekey' on the CLI, or System Administration -> Feature Keys on the GUI. You will see the applicable feature keys that were tied to your demo license listed there.
I hope this helps!
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...