Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Cisco Employee

Import of a Virtual Appliance on VMware Fails Integrity Check

The OVF file of a Virtual Defense Center and managed device fails to be imported on VMware with the following errors:

The OVF package is invalid and cannot be deployed.

File Sourcefire_Defense_Center_Virtual64_VMware-XXX.ovf fails integrity check and

might have been corrupted during transfer.

Screenshot of the error message:

Everyone's tags (2)
2 REPLIES
Cisco Employee

This error occurs when an OVF

This error occurs when an OVF image of a Virtual Appliance file is modified upon extraction.  This usually occurs when a virtual image is being extracted using WinZip.

Steps to deploy an OVF image properly:

  1. Verify that you are using the supported platform.
  2. Verify that the md5sum of the OVF image matches with the md5sum which is provided on the support site for that particular Virtual Appliance.
  3. Create a folder on your local host.
  4. Extract the virtual appliance on the created folder.
  5. Remove the .mf file from the directory.
  6. Import the OVF image now, and deploy it.
Cisco Employee

Removing mf file resolved my

Removing mf file resolved my issue. Old post but helped..

HTH, please rate all useful posts! Sasikumar.
7546
Views
29
Helpful
2
Replies
CreatePlease to create content