Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Policy Apply failing from FMC 6.2.2

Dear all, The FMC show messages similar to "Deployment failed due to configuration error . If problem persists after retrying, contact Cisco TAC. Our FMC version 6.2.2, with this error, we cannot add or modify the policy. I see the bug CSCvb93301 , but our version is not meet it and the workaround is not my issue. The failure is in the following attachment.
3 REPLIES
Cisco Employee

Re: Policy Apply failing from FMC 6.2.2

Hi Jack,

 

Its too early to say anything based on the error on GUI.

Login to FMC CLI and elevate to root mode and check the pigtail logs.

 

>sudo su

>pigtail deploy

 

Let it run until deployment fails and then check the logs (they would be huge) which would provide better understanding of the failure.

 

Hope it helps,
yogesh

Community Member

Re: Policy Apply failing from FMC 6.2.2

why? > system support tail-logs sudo: /cisco/cli/bin/log_tail.py: command not found
Highlighted
Community Member

Re: Policy Apply failing from FMC 6.2.2

FYI -- We are running 6.2.2.2 and get deployment failures as well (from time to time). We have to re-deploy and the 2nd time it has always deployed correctly.  

 

The error message is different though, but still same result in the deployment failing.

 

 

153
Views
0
Helpful
3
Replies
CreatePlease to create content