Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2611XM with FW-feature and dot1q-trunking

Hello,

I want to set up a dot1q trunk to my switch on Fa0/0 of a 2611XM with c2600-io3-mz.123-23.bin. But the "encapsulation dot1q command" is not supported on it's sub-interface. Does anyone know what's wrong?

Best regards, Peter

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 2611XM with FW-feature and dot1q-trunking

Peter , Im glad you resolved the issue with code upgrade.

Rgds

Jorge

5 REPLIES

Re: 2611XM with FW-feature and dot1q-trunking

Peter,

most likely the running code does not support trunking , please go to software advisory link, choose features needed , and search for ieee 802.1q vlan trunking for your platform, include firewalling for feature set.

http://tools.cisco.com/Support/Fusion/FusionHome.do

HTH

Jorge

New Member

Re: 2611XM with FW-feature and dot1q-trunking

Thanks,

Upgrading my IOS worked and resolved this issue.

Peter

Re: 2611XM with FW-feature and dot1q-trunking

Peter , Im glad you resolved the issue with code upgrade.

Rgds

Jorge

Silver

Re: 2611XM with FW-feature and dot1q-trunking

I think it has ETHERNET port, it is has no Fast ethernet Port.

If it has not fast ethernet port than it will not support trunking. that is ONE.

Second if it has Fast ethernet port but still it is not showing encapulation, check into SUBINTERFACE Command if it is supporting ot not.

Third, If you have fast ethernet but still it not showing ecanpuslation dot1q, than upgrade the IOS. NOw when you are going to upgrade IOS please check your flash??? free space.

This is only end to end solution for that.

Again keep in mind... TRUNK only support by fast ethernet + check on SUB interface.

Regards,

Dharmesh Purohit

Re: 2611XM with FW-feature and dot1q-trunking

Hi Dharmesh, the 2611XM model has two builtin fastethernet ports.

Rgds

Jorge

242
Views
7
Helpful
5
Replies