Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

3845 Terminal Server Issues - Line Busy

Hello, we seem to have experienced a problem when upgrading some of our Cisco terminal severs (3845s) to c3845-ipbasek9-mz.124-21.bin.

Certain Terminal lines would say they were in use when trying to connect.

Any ideas?

2 REPLIES
Silver

Re: 3845 Terminal Server Issues - Line Busy

Make sure that the async lines use the minimum configuration of the transport input telnet command. So you can Telnet to the devices on the async line.

For the further description following URL may help you for the configuration

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml

New Member

Re: 3845 Terminal Server Issues - Line Busy

Hello,

The config is fine. Here is some more info:

Requested line is busy

If I do a show line or show user for the particular line that reports the message it shows it's not in use, the only other message that we see in the logs after a reload was the following.

%SYS-3-HARIKARI: Process SSH Process top-level routine exited

1146
Views
0
Helpful
2
Replies
CreatePlease to create content