Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

506e slow internet access

New to 506e. Just installed. Replaced a Netgear FVS318. Cable for the internet connection. Pix 6.3(4) PDM 3.0(2). Internet is now doing a whooping 222k. Where should I start looking?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: 506e slow internet access

Looks like you possibly have a bad cable or a duplex mismatch. Are you hard coding the interface? (speed/duplex)

5 REPLIES
New Member

Re: 506e slow internet access

First I would look at your interfaces for errors. Post a copy of your "sh int".

New Member

Re: 506e slow internet access

Here it is:

Result of firewall command: "sh int"

interface ethernet0 "outside" is up, line protocol is up

Hardware is i82559 ethernet, address is 0013.60ac.bc3d

IP address 24.166.106.239, subnet mask 255.255.254.0

MTU 1500 bytes, BW 100000 Kbit full duplex

262124 packets input, 110396808 bytes, 0 no buffer

Received 184612 broadcasts, 51 runts, 0 giants

5921 input errors, 2796 CRC, 3074 frame, 0 overrun, 2796 ignored, 0 abort

55770 packets output, 6130659 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 babbles, 0 late collisions, 0 deferred

0 lost carrier, 0 no carrier

input queue (curr/max blocks): hardware (128/128) software (0/49)

output queue (curr/max blocks): hardware (0/3) software (0/1)

interface ethernet1 "inside" is up, line protocol is up

Hardware is i82559 ethernet, address is 0013.60ac.bc3e

IP address 192.168.0.254, subnet mask 255.255.255.0

MTU 1500 bytes, BW 100000 Kbit full duplex

88463 packets input, 8799641 bytes, 0 no buffer

Received 10697 broadcasts, 0 runts, 0 giants

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

102423 packets output, 110751550 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 babbles, 0 late collisions, 0 deferred

0 lost carrier, 0 no carrier

input queue (curr/max blocks): hardware (128/128) software (0/15)

output queue (curr/max blocks): hardware (5/41) software (0/1)

Lots of errors on the WAN port

New Member

Re: 506e slow internet access

Looks like you possibly have a bad cable or a duplex mismatch. Are you hard coding the interface? (speed/duplex)

New Member

Re: 506e slow internet access

Yea, I think it is a duplex problem. It was auto and now I'm trying different settings. We'll see what happens.

New Member

Re: 506e slow internet access

Thanks.

100full did the trick.

242
Views
0
Helpful
5
Replies